Georgia Thermal Products specializes in the production of industrial vacuum tray dryers and hot-wall vacuum ovens. Our expertise lies in seamlessly integrating supplementary equipment like vacuum pumps, traps, fluid heating, and solvent condensers. Moreover, we offer tray dryers and vacuum oven systems that are hazardous location or explosion-proof rated, catering to the needs of chemical, pharmaceutical, and aerospace industries.
existing designed sizes:
Model 2GTS | 2-cuft | 56-liter
Model 4GTS | 4.5-cuft | 127-liter
Model 8GTS | 8-cuft | 226.5-liter
Model 27GTS | 27-cuft | 764.5-liter
Model 64GTS | 64-cuft | 1812-liter
MODEL GTS
HOT WALL VACUUM OVEN
The GTS heating system is mounted externally to the vacuum vessel, allowing it to heat the walls. This unique design takes the energy absorbed by the walls and reradiates it into the product inside the vacuum oven vessel.
MODEL GXS
Hazardous Location HOT-WALL vacuum oven
The GXS provides drying that meets the codes for NFPA Class & Division, IECEx, and ATEX applications. Its heating system consists of an explosion-proof heating array attached to the outside of the vacuum vessel.
existing designed sizes:
Model 2GXS | 2-cuft | 56-liter
Model 4GXS | 4.5-cuft | 127-liter
Model 8GXS | 8-cuft | 226.5-liter
Model 27GXS | 27-cuft | 764.5-liter
Model 64GXS | 64-cuft | 1812-liter
specification sheet
existing designed sizes:
Model 2GTC | shelf size 11.5 x 18.0-in
Model 4GTC | shelf size 17.5 x 23.5-in
Model 10GTC | shelf size 23.5 x 23.5-in
Model 27GTC | shelf size 35.5 x 35.5-in
Model 64GTC | shelf size 47.5 x 47.5-in
MODEL GTC
VACUUM TRAY DRYER
This particular model is favored by customers who need to dry slurries or remove condensable(s) from solids. Our conductive shelves can be individually controlled electrically or heated & cooled using an integrated mineral oil pumping system.
MODEL GXC
hazardous location
TRAY DRYER
This tray dryer employs the same technology as our Model GTC but it is specifically designed to function in hazardous location-rated rooms and environments, including Class 1 Div 1 Groups C&D
existing designed sizes:
Model 2GXC | shelf size 11.5 x 18.0-in
Model 4GXC | shelf size 17.5 x 23.5-in
Model 10GXC | shelf size 23.5 x 23.5-in
Model 27GXC | shelf size 35.5 x 35.5-in
Model 64GXC | shelf size 47.5 x 47.5-in
specification sheet
existing designed sizes:
Model 2GTH | 2-cuft | 56-liter
Model 4GTH | 4.5-cuft | 127-liter
Model 8GTH | 8-cuft | 226.5-liter
​
specification sheet
MODEL GTH
HOT WALL FURNACE
The GTH is an advanced tube furnace that can operate at ultra-high vacuum levels and low furnace temperatures. It is composed of a rolled alloy vessel, typically made of high-temperature stainless steel, and is surrounded by a tube furnace made of either quartz or ceramic fiber.
turbomolecular pumping
intelligent controls & interfaces
haz-loc
purge panels & intrinsic barriers
