top of page
orange-black gradiant_edited.png

MODEL GTC
VACUUM TRAY DRYER

This particular model is favored by customers who need to dry slurries or remove condensable(s) from solids. Our conductive shelves can be individually controlled electrically or heated & cooled using an integrated mineral oil pumping system.

Tray Dryer Vacuum Oven

existing designed sizes:

Model 2GTC   |  shelf size 11.5 x 18.0-in

​

Model 4GTC   |  shelf size 17.5 x 23.5-in

​

Model 10GTC |  shelf size 23.5 x 23.5-in

​

Model 27GTC |  shelf size 35.5 x 35.5-in

​

Model 64GTC |  shelf size 47.5 x 47.5-in

​

Model 80GTC |  shelf size 47.5 x 47.5-in

orange-black gradiant_edited.png

standard features

  • Continuous Operating Temperature. standard 600°F (315°C)

  • Vacuum Range Capability. 760 Torr to 1-mTorr; optional < 5x10-8 Torr range

  • Temperature Uniformity.  1% of Set-Point

  • Process Control.  ramp & soak programmable temperature and vacuum​​

  • Over-Temperature Control.  FM approved limit control with digital display

  • Heated Shelves.  electrically or oil heated platens; with optional water cooling

  • Vessel Construction. reinforced heavy wall stainless steel plate

  • Exterior.  powder coated heavy gauge mild steel exterior with stainless optional

  • Vessel Door.  insulated with O-ring seal and lateral adjusting needle bearing hinges

  • Vessel Access Ports.  NW flanged ports for vacuum, inert gas, and data sensors

  • Operating Voltages.  120V, 208/240-1 or 3 phase, 380/415/480-1 or 3 phase

  • Warranty.  1-year Limited 

SAM_4467_edited_edited.jpg

Commonly known as a vacuum tray dryer this model is popular amongst customers requiring to dry slurries or evaporate condensable(s) from solids.  Our individually controlled heated shelves or platens offer accelerated drying times, high uniformity, and pinpoint accuracy.  Distillation systems can be fully integrated and automated into the GTC maximizing process capabilities. High vacuum systems can be utilized for degassing epoxies, silicones, and adhesives in electronics and semiconductor applications.

 

Full system integration can be provided which includes but is not limited to, roughing & high vacuum pumping systems, automated distillation trapping, and self-contained water or oil heat cool systems.  Programmable features include inert gas sweeping, sweep to atmosphere and vacuum level ramping using throttle control.,  

bottom of page